How to Clean Marble: Easy Steps for Countertops and Floors

How to Clean Marble: Keep Your Countertops and Floors Looking Like New

Marble is a timeless and elegant choice for countertops and floors, but it needs the right care to stay beautiful. Because it’s a porous stone, it can absorb spills, stain easily, and dull over time. The good news? Keeping your marble surfaces spotless is simple with the right cleaning routine. Here’s how you can maintain that gorgeous shine using Quick ‘n Brite’s Ultimate Cleaning Kit.

Daily Cleaning Routine for Marble

• Wipe up spills right away – Marble is porous, so liquids like coffee, wine, and juice can stain if left sitting.
• Use a soft cloth with warm water – A quick wipe with a damp Quick ‘n Brite Microfiber Cloth will remove dust and everyday messes.
• For extra cleaning power – A gentle cleaner like Quick ‘n Brite All-Purpose Cleaner will help remove grease and grime without damaging the stone.
• Dry completely – Water spots can leave marks on marble, so always follow up with a dry Quick ‘n Brite Microfiber Cloth.

Pro Tip: Avoid vinegar, lemon juice, or anything acidic—these can etch the surface and leave dull spots.

Deep Cleaning Marble Countertops and Floors

Every once in a while, marble needs a deeper clean to maintain its shine. Follow these steps with Quick ‘n Brite’s Ultimate Cleaning Kit:

What You’ll Need:

• Quick ‘n Brite All-Purpose Cleaner
• Warm water
• Soft Quick ‘n Brite Microfiber Cloths
• A gentle scrubbing sponge
• Quick ‘n Brite Cleaning Paste (for stains)
• Plastic wrap (for stubborn stains)

Steps for a Deeper Clean:

1. Mix your cleaner – In a spray bottle, combine warm water and a small amount of Quick ‘n Brite All-Purpose Cleaner.
2. Spray and wipe – Lightly mist the marble surface and wipe with a Quick ‘n Brite Microfiber Cloth.
3. Buff dry – Use a clean, dry microfiber cloth to remove any moisture.
4. Handle stubborn stains – Apply Quick ‘n Brite Cleaning Paste to the affected area, cover with plastic wrap, and let it sit overnight. Wipe away the next day and rinse with water.

Fixing Etching and Stubborn Stains

If you notice dull spots or marks from acidic spills, don’t panic! Here’s how to restore the shine:

• Buff with #0000 steel wool – Gently rub the etched area with #0000 super fine steel wool to smooth it out.
• Buff with a microfiber cloth – Follow up by rubbing the area with a Quick ‘n Brite Microfiber Cloth to restore the polish.
• Use Quick ‘n Brite Cleaning Paste – For deeper etching, apply a small amount of Quick ‘n Brite Cleaning Paste, let it sit for a few minutes, and buff away with a soft cloth.

How to Prevent Damage: Do’s and Don’ts

✅ Do:

• Clean up spills as soon as they happen.
• Use coasters and trivets under glasses and hot pans.
• Sweep or dust mop floors regularly to prevent scratches from dirt and debris.

❌ Don’t:

• Use vinegar, lemon, or any acidic cleaner.
• Scrub with rough sponges or abrasive cleaners.
• Let water sit on the surface for long periods.

For Really Stubborn Hard Water Stains

If you've followed the steps above and still have tough, deep-set stains, don’t worry—here are some extra tricks to help tackle those really stubborn spots:

Use Quick 'n Brite Cleaning Paste

For hard water stains, apply a thick layer of Quick 'n Brite Cleaning Paste directly to the affected area. Let it sit for several hours or overnight to break down mineral deposits.

Use 0000 Steel Wool

For glass or metal surfaces, gently scrub the area with 0000-grade (super fine) steel wool and Quick 'n Brite Paste. This method is tough on stains but gentle enough not to scratch. Use circular motions for best results, applying light pressure to avoid damaging the surface.

Finish with Rinsing and Polishing

After scrubbing, rinse thoroughly with warm water, and polish the area with a microfiber cloth to reveal a spotless, streak-free finish.

FAQs: Common Questions About Cleaning Marble