Quick’n Brite
FAQs

Yes. Our product will remove pet stains and odors. Please see our Cleaning Tips section and follow directions pet stains.

Apply Quick’n Brite paste full strength with a wet non-scratch scrub sponge or stiff brush. Let sit for 20 to 30 minutes and wipe again with more cleaner and non-scratch scrub sponge or brush, then rinse. For extremely bad areas, use 0000 steel wool and repeat the process if necessary.

Apply Quick’n Brite paste or liquid full strength generously to the spot and wipe with a very wet terry cloth back and forth in a 4-5″ motion. Wipe with a clean wet cloth then a dry terry cloth until the spot lifts from the fabric. Always spot check for Colorfastness first before using cleaner.

Inside Windows – Apply Quick’n Brite light solution with a microfiber cloth or other cloth. Then squeegee, wipe, or rinse. If streaking occurs solution is too strong, add more water.

Outside Windows – Mix 1/3 cup Quick’n Brite with a gallon of water. Rinse the window and apply with a brush, sponge, or cloth, then rinse.

Always spot-check for colorfastness first before using the cleaner. Wet material first – Apply Quick’n Brite paste or liquid full strength generously to the spot and then "trap" cleaner and stain between layers of clothing and rub briskly together to loosen the stain. Then throw into wash. Do not dry until the spot is removed. For tough stains soak overnight in a heavy solution of Quick’n Brite, then apply full strength and wash.

For Kitchen Cabinets and General Cleaning, apply Quick’n Brite heavy solution with a non-scratch scrub sponge. or cloth. Then wipe or rinse. For a heavy grease build-up, use full-strength liquid or paste and wipe with non-scratch let it sit for about 5 minutes, re-wipe with cleaner, and wipe or rinse off.For Stainless Steel and Shiny SurfacesUse light solution and spray then wipe dry. If streaking occurs solution is too strong.

For automobiles, tires, or wheels, apply Quick’n Brite light solution to the surface with scrub sponge or terry cloth, then hose or rinse off. To remove oxidation, grease, tar, or brake dust, wet the surface and apply Quick’n Brite full strength with a wet non-scratch scrub sponge or brush in a slow circular motion. Rinse or hose off.

Quick‘n Brite is great for boats with fiberglass, aluminum, vinyl seats and canvas. All can be cleaned with Quick’n Brite. Apply Quick’n Brite heavy solution to surface with a non-scratch scrub sponge or terry cloth, then hose or rinse off. To remove heavy build-up, wet the surface and apply Quick’n Brite paste full strength with a wet non-scratch scrub sponge or brush in a slow circular motion. Rinse or hose off. For extremely bad areas let sit for 10 min then wipe and rinse.

Apply Quick’n Brite paste or liquid full strength generously to the spot and wipe with a very wet terry cloth back and forth in a 4-5″ motion. Wipe with a clean wet cloth then a dry terry cloth until the spot lifts from the fabric. Always spot check for colorfastness first before using cleaner.

For appliances that are aluminum, chrome, stainless steel or ceramics apply Quick’n Brite light solution with a very wet non-scratch scrub sponge or cloth. Wipe or rinse. For heavy grease use Quick’n Brite full strength with a non-scratch scrubber sponge and wipe or rinse off.

For hard wood, laminate or vinyl apply Quick’n Brite light solution with a mop, sponge or cloth. Then wipe dry or rinse. Steam mops – Spray light solution on floor first then steam mop. Replaces expensive cleaners for under 15 cents a bottle. For a heavy grease build-up, Use full strength liquid or paste and wipe with non-scratch sponge, wipe or rinse off.

Yes. Our product does a wonderful job on hardwood floors. Please see our Cleaning Tips section for helpful advice.

Yes. Quick’n Brite is non-abrasive, making it ideal for use on granite, marble, and other delicate surfaces. It can also safely be used on chrome, stainless steel, and glass without scratching or harming the surface.