Inflatable Hot Tub Cleaning Guide

Why Clean Your Inflatable Hot Tub

Regular cleaning removes bacteria, algae, and mineral buildup from your inflatable hot tub’s walls, floor, and plumbing. Keeping the water clear prevents odors and protects your investment by reducing wear on the liner and pump.

Benefits of Regular Cleaning

• Hygiene: Eliminates contaminants that affect skin and respiratory health.
• Performance: Maintains proper water flow and jet function.
• Longevity: Extends the life of your pump, heater, and liner.
• Cost Savings: Reduces the frequency of water changes and part replacements.

Supplies You Need

• Garden hose (for draining and rinsing)
• Bucket
• Soft-bristle brush or double-sided sponge
• Microfiber cloth
• Skimmer net
• Ultimate Cleaning Starter Kit (paste, liquid cleaner, sponge, cloth)
• Replacement filter cartridge (if due)
• Towels for drying

Step-by-Step Cleaning

1. Turn Off and Drain

Switch off the power at the breaker. Attach your hose to the drain valve and direct the water to a proper drain. Let the tub empty completely.

2. Remove Debris

Use the skimmer net to collect leaves, insects, and loose debris. A clear tub makes the next cleaning steps simpler.

3. Scrub Surfaces

Apply a small amount of Quick ’n Brite Cleaning Paste from the Ultimate Kit to the sponge. Scrub walls, floor, and waterline to remove scum and mineral deposits. Rinse thoroughly after scrubbing each section.

4. Clean the Filter

Remove the filter cartridge. Rinse it under the hose, then soak it in a bucket of diluted Quick ’n Brite Liquid Cleaner for 15 minutes. Rinse again and allow it to air-dry before reinstalling.

5. Rinse and Refill

Give the tub a final rinse with the hose. Close the drain valve, reinstall the filter, then refill the tub with fresh water. Balance water chemistry before heating.

6. Wipe and Dry

Use the microfiber cloth to wipe down controls, the tub rim, and any remaining wet spots. A dry surface prevents mold and mildew growth.

How Our Ultimate Cleaning Starter Kit Helps

The Ultimate Cleaning Starter Kit includes:

• Cleaning Paste: Removes tough spots without scratching
• Concentrated Liquid Cleaner: Rinses clean with no residue
• Double-Sided Sponge: Scrub and smooth in one tool
• Microfiber Cloth: Polishes surfaces streak-free

With these four essentials, you cover every cleaning task with a single, easy-to-store kit.

Maintenance Tips

• Cover Between Uses: Keeps debris and UV exposure to a minimum.
• Weekly Quick Clean: Skim and wipe with diluted liquid cleaner.
• Filter Replacement: Swap out filters every 3–6 months.
• Check pH Regularly: Keep pH 7.2–7.6 to prevent scale and corrosion.

FAQs

How often should I deep clean?

Drain and scrub your inflatable hot tub every 1–3 months, or sooner if you notice cloudy water or scum lines.

Can I use bleach or harsh chemicals?

No. Harsh chemicals can damage the tub liner and disrupt water chemistry. Use non-toxic, safe, eco-friendly Quick ’n Brite formulas instead.

How do I keep the water clear between deep cleans?

Skim daily, wipe weekly with diluted liquid cleaner, and maintain proper sanitizer levels.

What if my filter is past due?

Replace it immediately to ensure proper water flow and prevent strain on the pump.