Apply QB paste full strength with a wet non-scratch scrub sponge or stiff brush. Let sit 20 to 30 minutes and wipe again with more cleaner and non-scratch scrub sponge or brush, then rinse. For extremely bad areas, use 0000 steel wool and repeat the process if necessary.

Apply QB paste or liquid full strength generously to the spot and wipe with a very wet terry cloth back and forth in a 4-5″ motion. Wipe with a clean wet cloth then a dry terry cloth until the spot lifts from the fabric.

Always spot check for Colorfastness first before using cleaner.

Inside Windows – Apply QB Light solution with a micro-fiber cloth or other cloth. Then squeegee, wipe or rinse. If streaking occurs solution is too strong, add more water.

Outside Windows – Mix 1/3 cup QB to a gallon of water. Rinse window and apply with brush, sponge or cloth, then rinse.

Always spot check for colorfastness first before using cleaner. 
Wet material first – Apply QB paste or liquid full strength generously to the spot and  trap cleaner and stain  between layers of clothing and rub briskly together to loosen stain.  Then throw into wash.  Do not dry until spot is removed.  For tough stains soak overnight in heavy solution of QB, then apply full strength and wash.

Kitchen Cabinets/ General Cleaning
Apply QB heavy solution with a non-scratch scrub sponge. or cloth.  Then wipe or rinse. For a heavy grease build-up, Use full strength liquid or paste and wipe with non-scratch let it sit for about 5 minutes, re-wipe with cleaner and wipe or rinse off.

Shiny Surfaces
Use light solution and spray then wipe dry. If streaking occurs solution is too strong.

For auto, tops, tires or wheels, apply QB Light solution to surface with scrub sponge or terry cloth, then hose or rinse off. To remove oxidation, grease, tar or brake dust. Wet the surface and apply QB full strength with a wet non-scratch scrub sponge or brush in a slow circular motion. Rinse or hose off.

QuicknBrite is great for boats: fiberglass, aluminum, vinyl seats and canvas. All can be cleaned with QuicknBrite.

Apply QB heavy solution to surface with non-scratch scrub sponge or terry cloth, then hose or rinse off. To remove heavy build-up, wet the surface and apply QB paste full strength with a wet non-scratch scrub sponge or brush in a slow circular motion. Rinse or hose off. For extremely bad areas let sit for 10 min then wipe and rinse.

Apply QB paste or liquid full strength generously to the spot and wipe with a very wet terry cloth back and forth in a 4-5″ motion. Wipe with a clean wet cloth then a dry terry cloth until the spot lifts from the fabric.

Always spot check for colorfastness first before using cleaner.

For appliances that are aluminum, chrome, stainless steel or ceramics apply QB light solution with a very wet non-scratch scrub sponge or cloth. Wipe or rinse. For heavy grease use QB full strength with non-scratch scrubber sponge and wipe or rinse off.

For hard wood, laminate or vinyl apply QB light solution with a mop, sponge or cloth. Then wipe dry or rinse.

Steam mops – Spray light solution on floor first then steam mop. Replaces expensive cleaners for under 15 cents a bottle.

For a heavy grease build-up, Use full strength liquid or paste and wipe with non-scratch sponge, wipe or rinse off.

QB can be used with or without water. Apply directly to hands and rub together briskly. Wipe or rinse off. QB will soften your hands and remove grease and dirt.

Inside of Dishwasher – to clean out the inside of the dishwasher add 1 tablespoon of QB paste or liquid to bottom of washer basin. Run on the hottest cycle with no dishes. Repeat 2-3 times to completely clean out the inside of dishwasher.

Dishes – Add 1 teaspoon of QB paste or liquid to each load of dishes (instead of your regular soap) Wash normally. QB will clean your dishes and rinse clean. QB is half the cost of your pod cleaners!

If QB leaves a film use Half the amount of cleaner.